Change the Time on the SBA or SB-100
KB0058: Change the Time on the SBA or SB-100
- Press the lock button in the lower right of the clock keypad to go into Supervisor Mode. Type in the correct security code. The default code is “00 00 00”.
- Type in the number “54” on the keypad. This quick pick will take you directly to the set time menu.
- Press the enter button until the hour is flashing.
- Use the up or down arrows to move the hour ahead or back one hour.
- Press enter to save the changes.
- Press the clear button twice to exit out of supervisor mode.