Change the Time on an PIN, PROX or PROXe Time Clock

KB0056: Change the Time on an PIN, PROX or PROXe Time Clock

Solution:

1. Press the lock button in the lower right of the clock’s keypad to go into Supervisor Mode. Type in the correct security code. The default code is “00 00 00”.
2. Press the Down arrow once to set the date and time.
3. Press the Enter button until the hour is flashing.
4. Use the Up or Down arrows to move the hour ahead or back one hour.
5. Press Enter to save the changes.
6. Press the Clear button twice to exit out of supervisor mode.